(Copper Foil & Fluoropolymer Film)
pcX is very proud to now be stocking both series of the V-Cap line of signal capacitors, probably the hottest cap line in today's DIY marketplace. Many feel it's the finest sounding line-up of caps, at any price !
pcX is the only other retailer (besides V-Cap themselves) offering these caps for DIY retail sales, in North America.
A few Application Notes about the V-Caps:
These caps use 18 AWG Fluoropolymer-insulated, or bare solid copper leads. Because of the stiffness of these leads, extra care should be exercised when bending the leads for installation. Although the V-Caps are not polarized, many have found it is best to keep the lead orientation relative to the innermost and outermost foil consistent. The green lead (short lead on OIMP series) indicates the outermost foil, and should always be connected to the lowest impedance return path to ground in the circuit. In practice, this means the outer foil should be connected towards the plate of first stage, when used in amplifiers. If using as a bypass cap to ground, connect outer foil to ground. If using as a bypass cap from a signal to B+, connect outer foil to B+. Another way to identify is the “V” in the V-Cap label indicates “inner foil” side of the cap. Leads should be kept as short as possible, and the caps should be mounted securely. 3M double -sided foam tape and plastic ties work well for this. Avoid over-tightening with ties.
IMPORTANT NOTE: As V-Cap is already aggressively priced via it’s Quantity Discount Schedule, pcX does not “double discount” thru any other sales promotion, that may be currently running.
Click More Info Buttons to see Quantity Pricing
pcX matches Capacitors for $1.00 per pair
IMPORTANT NOTE: During pcX’s Monthly Sales, There is NO DOUBLE DISCOUNTING applied over and above any "special pricing” on any item, including items with quantity pricing.