25%CON

VAMPIRE "Wing Nut" Style Binding Post  You’ll love the durable, no-nonsense construction of these binding posts. A single piece of hard brass transmits your music signal with full detail and clarity. It’s plated first in copper, then silver and gold to...

VAMPIRE 557-Y RCA Male Plug (Yellow stripe), 5.6mm opening An entry level RCA. Gold plated over brass. Accepts a 5-6mm overall diameter cable.  Specifications:RCA Male Plug5.6mm openingGold platedBrass material

VAMPIRE 558 Male Banana Plug, 6-12awg Designed to accept 6-12 gauge cable. Strip 1/2” of conductor and insert into connector barrel. Tighten both set screws. 2 sets are provided, choose the appropriate length screws for the cable diameter. Screw on the...

VAMPIRE 582 RCA Female Plug Designed to make proper electro-mechanical contact. Place the barrel and strain relief spring on the cable. Strip and tin the center conductor (3/16”). Solder to the center pin. Twist the shield together and solder to the...

VAMPIRE 807 RCA Male Plug, 7.2mm opening Designed to offer the same mechanical integrity as the acclaimed #800C, but at a lower price. The 807 is machined from brass instead of OFC. The polished chrome barrel insures a proper fit for cables up to 7.2 mm...

VAMPIRE 808 RCA Male Plug, 8.5mm opening Designed to offer the same mechanical integrity as the acclaimed #800C, but at a lower price. The #808 is machined from brass instead of OFC. The polished chrome barrel insures a proper fit for cables up to 8.5...

VAMPIRE B12 Male Banana Plug (Black only), 10-12awg The #B12 may be crimped or soldered. Slide the color code cap over the outer jacket of the cable. Strip 1/2” of insulation, insert the exposed conductor into the connector, then crimp or solder the...

VAMPIRE B12 Male Banana Plug, 10-12awgThe #B12 may be crimped or soldered. Slide the color code cap over the outer jacket of the cable. Strip 1/2” of insulation, insert the exposed conductor into the connector, then crimp or solder the conductor in place...

VAMPIRE B8 Male Banana Plug (Black only), 8awg The #B8 may be crimped or soldered. Slide the color coded cap over the outer jacket of the cable. Strip 1/2” of conductor, insert stripped conductor into connector, then crimp or solder in place. Slide...

VAMPIRE B8 Male Banana Plug, 8awg The #B8 may be crimped or soldered. Slide the color coded cap over the outer jacket of the cable. Strip 1/2” of conductor, insert stripped conductor into connector, then crimp or solder in place. Slide color code cap...

Vampire Connector BD Series Dual Male Banana Plug (Red only) 6awg

VAMPIRE BD Dual Male Banana Plug, 6 awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug6awgCopper materialGold Plating

VAMPIRE BD/2 Dual Male Banana Plug, 10awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug10awgCopper materialGold Plating

Vampire BP-0.5 Ground Post The Vampire BP.5 Grounding Post is built from one piece of hard brass (yes, this includes the nut!). First it’s plated in copper, then it’s plated in silver, and then it’s plated in gold to give DIYers the best possible medley...

VAMPIRE BP-2/CE Gold-Plated Dual Binding Posts, 1/8" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-2/CE is a...

VAMPIRE BP-3/CE Gold-Plated Dual Binding Posts, 3/16" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-3/CE is a...

VAMPIRE C4X Co-Axial RCA Male Plug (Chrome/no logo), 4.2mm opening For 3.5-4.2mm diameter cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to 1/4”, strip tip 1/2” of center...

VAMPIRE C5X/CB Co-Axial RCA Male Plug (Copper Base/Black), 5.7mm opening Copper with direct gold plating. For 5-5.7mm dia. cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to...