25%OS

270R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

220R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE PIN1 Male "rolled" Pin Connector, 10-12awg Gold plated speaker wire pin. Crimp connector to wire (10 ga. to 12 ga.), slide color coding over connector extending onto the jacket of the cable. Use a hand held hair dryer to shrink the color coding...

VAMPIRE SPD Tinned Copper Spade Lug, 10-12awg These Spade Connectors from Vampire are gold-plated, over nickel-plated, over a brass base metal. DIY Tip: After crimping, slide the color coding over the connector extending onto the jacket of the cable...

180R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE RG8 Gold-Plated (Copper Base) Spade Lug, 8awg (crimped) Gold plated step spade. Made from pure copper and designed to accept 8 gauge cables by crimping or soldering. Slide the color coding on the cable first, crimp or solder on the connector and...

150R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE HDS1 1/4" Gold Plated (Copper Base) Spade Lug, 6awg Made from pure copper, then gold plated. #HDS-1 will accept cables up to 6 ga., in size. Termination may be either solder or crimp. When crimping, be sure to crimp opposite the seam. The #HDS-1...

120R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

100R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

91R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

39R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE BD Dual Male Banana Plug, 6 awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug6awgCopper materialGold Plating

36R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

Vampire Connector BD Series Dual Male Banana Plug (Red only) 6awg

VAMPIRE 558 Male Banana Plug, 6-12awg Designed to accept 6-12 gauge cable. Strip 1/2” of conductor and insert into connector barrel. Tighten both set screws. 2 sets are provided, choose the appropriate length screws for the cable diameter. Screw on the...

33R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE B8 Male Banana Plug, 8awg The #B8 may be crimped or soldered. Slide the color coded cap over the outer jacket of the cable. Strip 1/2” of conductor, insert stripped conductor into connector, then crimp or solder in place. Slide color code cap...