25%OS

50R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

47R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE CM1F RCA Female Jack (White only), inside nut Copper with direct gold plating.Designed to be the finest connector available. The CM1F is gold plated and comes with a gold plated ground lug. It is designed to fit on chassis that have used a...

39R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

33R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE CM2F RCA Female Jack (Red Only), outside nut Designed to be the finest connector available. The CM2F is gold plated and comes with all needed mounting hardware. It is designed to fit on chassis that have a .5” hole where the mount nut is on the...

27R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE CM2F RCA Female Jack, outside nut Designed to be the finest connector available. The CM2F is gold plated and comes with all needed mounting hardware. It is designed to fit on chassis that have a .5” hole where the mount nut is on the outside...

20R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE CMHEX RCA Female Jack (White only/no stripe), inside nut Designed to be the finest connector available. The CMHEX is gold plated with a Teflon dielectric. The CMHEX comes with a gold plated ground lug. Isolation washers are also included. It is...

18R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE CMHEX RCA Female Jack (no stripe), inside nut Designed to be the finest connector available. The CMHEX is gold plated with a Teflon dielectric. The CMHEX comes with a gold plated ground lug. Isolation washers are also included. It is designed to...

15R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

12R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

10R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE 582 RCA Female Plug Designed to make proper electro-mechanical contact. Place the barrel and strain relief spring on the cable. Strip and tin the center conductor (3/16”). Solder to the center pin. Twist the shield together and solder to the...

9R1 (9.1R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE C7X Co-Axial RCA Male Plug (Satin/no logo), 7.3mm opening For 6.5-7.3mm diameter cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to 1/4”, strip tip 1/2” of center...