25%WCC

Vampire Connector PCB2F/A Series Right-Angled RCA Female Jack pc-mount – Black/Red An angled PCB mount connector made with a Teflon* dielectric. The #PCB2F/A has a brass base metal, a copper subplate, silver subplate, and a hard gold finish...

VAMPIRE GS Male "solderless" Spade Lug, 10-12awg Crimp connector to wire (10 ga. to 12 ga.), slide color coding over connector extending onto the jacket of the cable. Use a hair dryer to shrink the color coding to size. Specifications:Male Spade...

VAMPIRE GP Male "solderless" Pin Connector, 10-12awg Crimp connector to wire (10 ga. to 12 ga.), slide color coding over connector extending onto the jacket of the cable. Use a hand held hair dryer to shrink the color coding to size. Specifications:Male...

VAMPIRE PIN1 Male "rolled" Pin Connector, 10-12awg Gold plated speaker wire pin. Crimp connector to wire (10 ga. to 12 ga.), slide color coding over connector extending onto the jacket of the cable. Use a hand held hair dryer to shrink the color coding...

VAMPIRE SPD Tinned Copper Spade Lug, 10-12awg These Spade Connectors from Vampire are gold-plated, over nickel-plated, over a brass base metal. DIY Tip: After crimping, slide the color coding over the connector extending onto the jacket of the cable...

VAMPIRE RG8 Gold-Plated (Copper Base) Spade Lug, 8awg (crimped) Gold plated step spade. Made from pure copper and designed to accept 8 gauge cables by crimping or soldering. Slide the color coding on the cable first, crimp or solder on the connector and...

VAMPIRE HDS1 1/4" Gold Plated (Copper Base) Spade Lug, 6awg Made from pure copper, then gold plated. #HDS-1 will accept cables up to 6 ga., in size. Termination may be either solder or crimp. When crimping, be sure to crimp opposite the seam. The #HDS-1...

VAMPIRE BD/2 Dual Male Banana Plug, 10awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug10awgCopper materialGold Plating

VAMPIRE BD Dual Male Banana Plug, 6 awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug6awgCopper materialGold Plating

Vampire Connector BD Series Dual Male Banana Plug (Red only) 6awg

VAMPIRE 558 Male Banana Plug, 6-12awg Designed to accept 6-12 gauge cable. Strip 1/2” of conductor and insert into connector barrel. Tighten both set screws. 2 sets are provided, choose the appropriate length screws for the cable diameter. Screw on the...

VAMPIRE B8 Male Banana Plug, 8awg The #B8 may be crimped or soldered. Slide the color coded cap over the outer jacket of the cable. Strip 1/2” of conductor, insert stripped conductor into connector, then crimp or solder in place. Slide color code cap...

VAMPIRE B8 Male Banana Plug (Black only), 8awg The #B8 may be crimped or soldered. Slide the color coded cap over the outer jacket of the cable. Strip 1/2” of conductor, insert stripped conductor into connector, then crimp or solder in place. Slide...

VAMPIRE B12 Male Banana Plug, 10-12awgThe #B12 may be crimped or soldered. Slide the color code cap over the outer jacket of the cable. Strip 1/2” of insulation, insert the exposed conductor into the connector, then crimp or solder the conductor in place...

VAMPIRE B12 Male Banana Plug (Black only), 10-12awg The #B12 may be crimped or soldered. Slide the color code cap over the outer jacket of the cable. Strip 1/2” of insulation, insert the exposed conductor into the connector, then crimp or solder the...

VAMPIRE YF RCA Adapter, 1 Male / 2 Female Angle Vampire Wire #YF Adapters  are machined from hard brass, with a plating that was developed from Vampire Wire's finest RCA connectors.  The #YF uses deep contact tubes with Teflon® dielectrics. These Y...

VAMPIRE Y RCA (1 Male to 2 Female) Adapter Vampire Wire RCA adapters are machined from hard brass, with a plating that was developed from Vampire Wire's finest RCA connectors. The #Y uses deep contact tubes with Teflon® dielectrics. Consisting of 1 male...

VAMPIRE PC2V Dual Right-Angled Nickel-plated RCA Female Jack, pc-mount Entry level PC mount RCA connector. Brass base with gold plating and PBT dielectric.  Specifications:RCA Female JackBrass materialGold Plating