Description
AECO Connector AX3-1613S Series Silver-Plated Tellurium Copper XLR Male Plug
The center pin can be assembled into the PTFE insulator and fixed with the other PTFE insulator parts.
Then assemble into the body via a screw.
The above parts will become the XLR body set.
The XLR body set and the shell are locked by screwing. The POM sleeve is fixed to the end of the shell by using a screw. The cable hole with sleeve is 9.0/11.5mm, without sleeve is 15.0mm.
Hollow structure conductor
Conductor between body isolate by PTFE insulator.
The conductor is made from high-purity tellurium copper without nickel plating.
This product can be disassembled into individual parts for repair and recycling.
Specifications:
Material:
Contact Pin: Tellurium copper (C14500 / copper contains over 99%).
Ground Pin: Brass alloy (C3604)
Insulator: PTFE
Body Shell: Stainless Steel (SUS304)
Shell: Stainless Steel (SUS304)
Sleeve: POM
Screw: Stainless Steel (SUS304)
Finish:
Contact pin: 120u" Silver plating (no nickel base)
Ground pin: : 120u" Silver plating (no nickel base)
Insulator: None.
Body Shell: None.
Shell: None.
Sleeve: None.
Screw: None.
Electrical Characteristics:
Contact resistance < 1.0 mOhm
Dimension:
Biggest OD: 18.9mm
Total Length: 49.5mm
Warranty
Full Manufacturer's Warranty