The new Cardas Clear is the company’s most accomplished phono cable. Its design incorporates the best conductors around and, as always with Cardas, these conductors use several Litz wires (4) made of the purest copper and gold. As we know, phono cables carry the risk of RFI/EMI interference due to their low signal levels and the necessary high levels of amplification produced by the preamp. To minimise interference as much as possible, extra care has been taken to optimise the shielding and insulating systems.
Features & Specifications:
Conductors:
Matched Propagation Kevlar core, ultra-fine Grade 1, 99.9999% pure oxygen free copper with SPN
clear coat (Litz), gauge sizes scaled to Golden Ratio proportions and range from 41 AWG to 39 AWG. Cross-field
layer geometry, insulated in ultra-thin extruded PTFE jacket.
Geometry:
Dual mono twisted pair conductors with anti-static LDPE air-tubes bound with carbon impregnated PTFE
tape wrap. Outer layer uses PTFE air-tubes scaled 1.618 times larger than the core tubes to suspend the composite
shield of 42 AWG tinned copper and magnet wire away from the signal carrying conductors. Finished in an ultra-soft
extruded TPR jacket.
Gauge: 4x25.5 AWG
Outside Diameter: 0.418”/10.6mm
Full Warranty
