2R2 (2.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K5 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

2R (2.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

1R8 (1.8R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE C5X/CB Co-Axial RCA Male Plug (Copper Base/Black), 5.7mm opening Copper with direct gold plating. For 5-5.7mm dia. cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to...

Audio Note 1K2 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

1R5 (1.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

1R2 (1.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE BP-2/CE Gold-Plated Dual Binding Posts, 1/8" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-2/CE is a...

820R Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned OFC...

1R (1.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

0R5 (0.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

680R Ohm 0.5 Watt, Audio Note Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a...

VAMPIRE BP-3/CE Gold-Plated Dual Binding Posts, 3/16" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-3/CE is a...

600R Ohm 0.5 Watt, Audio Note Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a...

Mundorf Pure Solid-Core Copper Wires 6 x 15awg(1.5mm) with PTFE Teflon (Gray/Orange) Initial listening test with regular stranded wires quickly showed, that our coil wires, used as internal cabling for loudspeakers impress by their detailed and...

Audio Note 470R Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a...