VAMPIRE SPD Tinned Copper Spade Lug, 10-12awg These Spade Connectors from Vampire are gold-plated, over nickel-plated, over a brass base metal. DIY Tip: After crimping, slide the color coding over the connector extending onto the jacket of the cable...

180R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE RG8 Gold-Plated (Copper Base) Spade Lug, 8awg (crimped) Gold plated step spade. Made from pure copper and designed to accept 8 gauge cables by crimping or soldering. Slide the color coding on the cable first, crimp or solder on the connector and...

Audio Note 1K8 Ohm 1 Watt, "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

150R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

Audio Note 1K5 Ohm 1 Watt, "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

VAMPIRE HDS1 1/4" Gold Plated (Copper Base) Spade Lug, 6awg Made from pure copper, then gold plated. #HDS-1 will accept cables up to 6 ga., in size. Termination may be either solder or crimp. When crimping, be sure to crimp opposite the seam. The #HDS-1...

120R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

Audio Note 1K2 Ohm 1 Watt, "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

100R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

Audio Note 1K Ohm 1 Watt, "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

#504 VAMPIRE BD/2 Dual Male Banana Plug (Black only), 10awg

91R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE BD/2 Dual Male Banana Plug, 10awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug10awgCopper materialGold Plating

820R Ohm 1 Watt, "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned OFC copper...

39R Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

VAMPIRE BD Dual Male Banana Plug, 6 awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug6awgCopper materialGold Plating

680R Ohm 1 Watt, Audio Note "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...