Audio Note 1K8 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

2R2 (2.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K5 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

2R (2.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

1R8 (1.8R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE C5X/CB Co-Axial RCA Male Plug (Copper Base/Black), 5.7mm opening Copper with direct gold plating. For 5-5.7mm dia. cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to...

Audio Note 1K2 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

1R5 (1.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

1R2 (1.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE BP-2/CE Gold-Plated Dual Binding Posts, 1/8" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-2/CE is a...

820R Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned OFC...

1R (1.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

0R5 (0.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

680R Ohm 0.5 Watt, Audio Note Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a...

VAMPIRE BP-3/CE Gold-Plated Dual Binding Posts, 3/16" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-3/CE is a...

600R Ohm 0.5 Watt, Audio Note Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a...

Mundorf Pure Solid-Core Copper Wires 6 x 15awg(1.5mm) with PTFE Teflon (Gray/Orange) Initial listening test with regular stranded wires quickly showed, that our coil wires, used as internal cabling for loudspeakers impress by their detailed and...