Connectors

VAMPIRE HDS1 1/4" Gold Plated (Copper Base) Spade Lug, 6awg Made from pure copper, then gold plated. #HDS-1 will accept cables up to 6 ga., in size. Termination may be either solder or crimp. When crimping, be sure to crimp opposite the seam. The #HDS-1...

Hidden Treasure High Definition Wall Receptacle (Black) Audio components will function at their highest level when powered by a pure phase correct AC waveform free from EMF and RF interference. This is why Audience has devoted years of research into AC...

ACBP-S Ground Post, Non-Magnetic, Billet Brass, Rhodium over Silver-Plated Premium short binding post made from high copper content brass. Posts plated with silver/rhodium, binding nuts are gold plated. Designed to accept standard bananas, spades, and...

AECO ARJ-4045R Rhodium-Plated Tellurium Copper RCA Female Jack Pair The plug and jack can be assorted and replaced with other standard coaxial RCA. By reducing the size of the conductor and path AECO is able to reduce the resistance, capacitance and...

AECO AX4-1611G Gold-Plated Tellurium Copper 4-pin Male XLR Plug The center pin is fixed to the PTFE insulator by assemble function. The PTFE insulator fixed on the body by using screw. The body and the shell locked by screwing. POM sleeve is fixed with...

SDIN 5 Pin DIN Phono Plug Straight Cardas Audio’s straight phono plug with five gold-plated brass pins and a billet aluminum housing. Comes with an Alley key for easy DIYing. Features• Straight• 5-pin female DIN phono plug• Billet...

Dual Binding Posts, 5-Way, Gold-Plated

BSP Mini-Spade (for the Screw Terminals on Vintage Amplifiers and Speakers) fits 10-14awg Overall width: 8mmFeatures• Mini-spade for the screw terminals on vintage amps & speakers• Fits 10-14 gauge wire• Overall width: 8.0 mm

FI-11M(G)-N1 High Performance, Power Connector 24K Gold-Plated

FP-209(R)S10 Pure Copper Spade Terminal, Rhodium-Plated (Max 10awg Wires)Features• α(Alpha) Pure copper Conductors• Connections: solder or crimp• Specified for wire diameters up to 4mm (8AWG)• Dimensions: 8mm ± 0.1mm (W)...

GNDPOST Grounding Post, Gold-Plated This simple and uninsulated terminal block can be used to make a ground terminal on a device, or any other connection.The hole on the outside can be fitted with a banana strip plug (type Viablue TS2). Features•...

AECO ABP-1111S Silver-Plated Tellurium Copper Banana Plugs The body of plug was lathed in one piece to avoid conduction loss when signals pass through the different structure and interface. The interface was continued with a hollow design to maintain...

AECO Connector ARP-1512S Series Silver-Plated Tellurium Copper RCA Male Plugs Set/4 The contact pin is formed on the body by plastic injection.The STAR modeling use the characteristics of Nylon composite material.which provide enough flexibly to connect...

Connex US Power/20A IEC Plug Set, Rhodium-Plated Brass (Black Carbon) Ultra-Premium Black Carbon Fiber & Machined Brass (Polished Chrome-plated Body) with (Rhodium-Plated over Brass Contacts) • Material:  High-Conent Copper Brass Base...

CAB Single Banana Plug, Silver/Rhodium Plated (accepts Spade lug or can be soldered) Cardas Audio’s CAB Single Banana Plug features a non-magnetic eutectic brass construction and gold-plated brass nuts. Its rhodium-over-silver plating makes it a top...

CABE Banana Plug for Magnapan Speakers Solderable single banana plug. Traditional spring loaded banana tip. Simple design can accommodate large or small wire. Non-Magnetic Eutectic Brass Nickel Plated. Specifications:Base metal: Non-magnetic...

CLJP C Copper Jumper (fits 6mm) Note: Discontinued Qty Avail: 10 Cardas Audio CLJP Copper Jumpers allow you to run single-ended speaker cables to your bi-wirable speakers. It’s one-piece bare copper construction is both durable and economic, allowing...

O Ring Spade, 12awg, Gold-Plated Copper, 12-10awg, Large