JUMPER-S High Performance Speaker Terminal Jumper Wires, Spade version
Most jumper cables supplied by speaker manufacturers are adequate for the job, but Furutech has never subscribed to being merely adequate. Furutech Speakerflux Jumper Cables use high-purity large diameter 6mm-squared α (Alpha) conductor for minimal internal impedance. Choose beautifully engineered FP-201R nonmagnetic pure-copper rhodium-plated spade connectors, or specify FP200BR nonmagnetic eutectic copper alloy rhodium-plated banana connectors. The Jumpers feature an insulation/dielectric of high-grade PE that reduces capacitance and resonance. The jacketing is RoHS-compliant PVC. As with the Speakerflux, their use results in greater resolution, clarity, more powerful dynamics, and an ultra-quiet soundstage in which music develops more coherently.
Specifications:
• 6 bundles of 20-strand α (Alpha)–OCC Conductor・0.18mm, 2.7mm diameter: Wire AWG: 3.0 SQ.mm / Over 13AWG
• Insulation: Air-foamed Irradiated PE (Red/White) 5.1mm diameter
• Cable Lay: Two twisted cores
• Sheath: Two layers flexible PVC (Purple/Red) 13mm diameter
• Shield: Special EMI- and noise-absorbent Formula GC-303 module
• Jacket: Nylon yarn braid approx. 14.5mm
• Connectors: Spade Terminal [FP-201 (R)] or Banana Connectors [FP-202 (R)]
Electrical Properties of Cable Test Method
Max. Conductor Resistance 6.4 Ω／km JISC3005 6 20℃
Min. Insulation Resistance 1000 MΩ-km JISC3005 9.1 20℃
Dielectric Strength AC. 1000 V／1 min. JISC3005 8
Electrostatic Capacitance Approx 50 PF／m at 1 KHz
Full Warranty