Hammond Transformers Model 1650G (1608A-1650A Series)
Audiophile Tube Output Transformer - 35 W, 6,600 Ohm CT
This enclosed audio signal transformer is for push-pull tube output circuits is manufactured with plastic coil forms for coil support and insulation and is similar to Hammond 1608-1650 Series multiple secondary output transformers but with re-designed secondaries for easy hook-up of secondary loads. The unit is designed to provide ample "headroom" at bass frequencies (note the weight of the transformer) and is tapped for 3.5, 8, 16, 250 or 500 ohm outputs. It has insulated flexible leads (8" min). Typical applications are triode, pentode and tetrode connected audio output.
Features:
- Similar to Hammond 1608-1650 Series multiple secondary output transformers (re-designed secondaries for easy hook-up of secondary loads).
- Designed for push-pull tube output circuits.
- Designed to provide ample "headroom" at bass frequencies (note the weight of each transformer).
- Secondary tapped for 4, 8 or 16 ohm outputs.
- Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
- Manufactured with plastic coil forms for coil support and insulation.
- Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum.
- Insulated flexible leads 8" min.
- Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
Specifications:
- Frequency Range: 30 Hz to 30 kHz
- Power Rating: 35 W
- Maximum D.C. Bias (Per Side): 200 ma
- Primary Impedance: 6.6 kOhms
- Secondary Impedance: 3.5/8/16/250/500 Ohms
- Shielding: Unshielded
- Termination Style: Wire lead
- Mounting Style: 4 slot, Above Chassis Mount, Type X
- Operation: Push-Pull (2 Tubes)
- Suggested Tube Types: 6L6GC, 807, 5881, EL34
- Width: 3.13”
- Depth: 3.75”
- Height: 3.81”
- Weight: 5 lbs
Manufacturer's Warranty