Hardware

#4-40 1/4" Counter-Sunk Phillips Screws 18-8, Stainless Black-Oxide, Top Cover Screws for most Sonic Frontiers and Anthem Products

#4-40 KEP Nuts, Stainless

#4 Lock Washers, Internal Tooth, Stainless Steel

WBT 9305 (replacement Nuts for 210 Cu and Silver)

Mundorf Heatsink with Adhesive Pad and screws for MResist Ultra Resistors The Mundorf M-resist MREU30 is rated at 3 watts in free air. Fit to the Mundorf heat sink to achieve 30 watts. Supplied with a heat sink pad a M3 nut and a M3 screw for fixing...

#6-32 1/4" Pan Head Phillips Machine Screws 18-8, Stainless

#6-32 1/4" Pan Head Phillips Screws 18-8 Stainless Black-Oxide For SF Power 2 & 3 Bottom Covers

#6 Terminal Lock Washer, Solder Lug, Matte Tin-Plated Brass

#4 Nylon Shoulder Washer Black (0.185" OD shoulder) Note: This part is specifically intended to be used as an isolation bushing for TO-220 power devices (which also typically use a thermal isolator pad) mounted onto a heat sink. This part accepts #4...

#6 Washer, Standard, Stainless Steel

#4-40 1/4" Pan Head Phillips Screws 18-8 Stainless Black-Oxide For SF Power 2 & 3 Rear Panels

#6-32 1/2" Pan Head Phillips Machine Screws 18-8, Stainless

#6-32 1/4" Counter Sunk Phillips 18-8 Stainless Steel, Black

#6-32 3/8" Undercut Counter Sunk Phillips 18-8, Stainless, Black Oxide Note: Used for the Top Cover of Anthem PVA MCAA P Series Amps.

M3 x 10mm Counter-Sunk Phillips Screws, 18-8 Stainless, Black Oxide Note: Often used for mounting IEC Inlets Power Inlet Modules.

#4 Nylon Shoulder Washer Clear (0.185" OD shoulder)

#6 Lock Washers, Internal Tooth, Stainless Steel

#6-32 5/8" Pan Head Phillips Machine Screws 18-8, Stainless