Mundorf Resistor 15R Ohm 5W MR5 Series
In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in the medium/high frequency range. The versions we offer have a continuous load capacity of two and a half, five or ten watts. In the impulse range, however, they are much higher continuous load capacity.
Specifications:
Resistance | 15 Ohm ±2 % |
Wattage | 5 Watt |
Dimensions | Ø8xL24 mm |
Connectors | Ø0,80xL35 mm |
Temperature Coefficient | ±300 ppm/°C |
Inductivity | <0,075 µH |
Dielectric Strength | 700 Volt AC |
Temperature range | -55°C/-67°F...+200°C/+390°F |
Conductor Material | Metal oxide |
Core| Potting | Ceramics| Cement |
Full Manufacturer's Warranty