Parts & Components

Mundorf Capacitor 0.68uF 450Vdc MCap® EVO Oil The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the...

Mundorf Capacitor 100.0uF 250Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

Mundorf Capacitor 2.70uF 250Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

Mundorf Capacitor 3.3uF 600Vdc MCap® Supreme Very soon after its market launch in 1992 the MCap® SUPREME Classic has been internationally acclaimed as top-class capacitor. Today it is considered by many users as a milestone in the modern audiophile...

Mundorf Capacitor 33.0uF 250Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

Mundorf Capacitor 200+200uF 500Vdc MLytic® HV The MLytic® HV · High Voltage Power Cap series is especially engineered for use in tube amplifiers. Two classic double capacity versions are available.  The ultra compact, axial leaded MLALcapacitors feature...

Mundorf Resistor 1R Ohm 5W MResist MOX MR5 Series Metal Oxide ± 2% Tolerance In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured...

Mundorf Resistor 1R5 (1.5R) Ohm 10W MResist Classic Series Ceramic Wirewound ± 2% Tolerance The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple...

Mundorf Resistor 2R7 Ohm 10W MR10 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 5R6 Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 6R8 Ohm 20W M-Resist Series With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the...

10000uF 50Vdc, FW Series, Electrolytic Capacitor +/-20% Tolerance, 25mmD x 50mmH Nichicon FW Electrolytic Caps are built for high end audio. They offer low distortion, mechanical damping and fine-tuned sonic performance, all in a compact form factor...

22000uF 80Vdc, KG Series, Electrolytic Capacitor Super Through, Solder Lug, +/-20% Tolerance, 76mmD x 100mmH These audio-grade capacitors are great for power supplies. They offer striking sound and come in three DIY-friendly models. Features:Great for...

Obbligato 0.68uF 630Vdc Copper Series Film Cap These Obbligato film caps have a solid copper case, soldered copper lead-out wires and individually wrapped. All measure very close to rated value, max 5% but typically 1-2%. Wound tight with no voids and...

Obbligato 22uF 630Vdc Film Oil Capacitor  Obbligato Film Oil Capacitors are constructed with thick-coated aluminum films imported from Germany. They’re great for valve amp power supplies and are praised by audiophiles for offering smooth presentations...

0R1 (0.10R) Ohm 5 Watt, Ohmite AG5 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 23.8mm L x 8.7mmD, Axial Lead

2R (2.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

240K Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic