Parts & Components

Jupiter 0.05uF 600Vdc, Yellow Vintage Tone Based closely on the Yellow Molded Astron capacitor for a more authentic tone to the time period. Construction is Aluminum Foil with Polyester (Mylar) Film Dielectric with 20awg tinned copper leads, +-10%...

4K3 Ohm 2 Watt, Kiwame Carbon Film Resistor, 1% Tolerance, Axial, Tinned Copper Leads, Flameproof Silicone Coated

12R Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

Mundorf Capacitor 2.20uF 450Vdc MCap® EVO Oil The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the...

Mundorf Capacitor 3.30uF 450Vdc MCap® EVO Oil The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the...

Mundorf Capacitor 6.80uF 450Vdc MCap® EVO Oil The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the...

Mundorf Capacitor 8.20uF 250Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

Mundorf Resistor 0R68 (0.68) Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e...

Mundorf Resistor 2R2 10W M-Resist Classic Series The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic resistor format that gives...

Mundorf Resistor 2R2 Ohm 20W M-Resist Series With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the...

Mundorf Resistor 3R3 Ohm 10W MR10 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 8R2 10W M-Resist Classic Series The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic resistor format that gives...

10000uF 100Vdc, KG Series, Electrolytic Capacitor Gold Tune, Solder Lug, +/-20% Tolerance, 50mmD x 100mmH These audio-grade capacitors are great for power supplies. They offer striking sound and come in three DIY-friendly models. Features:Great for...

47uF 450Vdc, VY Series, Aluminum Electrolytic Capacitor +/-20% Tolerance, 16mmD x 31.5mmH With their wide temperature ranges and easy-to-use form factors, Nichicon VY Capacitors make DIYing a breeze. Ideal for use in power supplies and tight spaces...

Obbligato 0.68uF 630Vdc  “New” Silv Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 3.2 L x 1.3 cm D Silv Series sounds smoother than the copper series and as smooth as the Ultra Series

Obbligato 0.68uF 630Vdc Copper Series Film Cap These Obbligato film caps have a solid copper case, soldered copper lead-out wires and individually wrapped. All measure very close to rated value, max 5% but typically 1-2%. Wound tight with no voids and...

Obbligato 1uF 630Vdc “New” Copper Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 3.2 L x 1.7cm D Coming In the audio world, there aren’t many low-cost high-quality film caps. Some of the ones commonly available are a little edgy...

Obbligato 4.7uF 630Vdc “New” Copper Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 3.8 L x 2.4cm D Coming In the audio world, there aren’t many low-cost high-quality film caps. Some of the ones commonly available are a little edgy...