Parts & Components

Mundorf Resistor 1R Ohm 5W MResist MOX MR5 Series Metal Oxide ± 2% Tolerance In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured...

Mundorf Resistor 1R5 (1.5R) Ohm 10W MResist Classic Series Ceramic Wirewound ± 2% Tolerance The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple...

Mundorf Resistor 2R2 Ohm 20W M-Resist Series With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the...

Mundorf Resistor 5R6 Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 6R8 Ohm 20W M-Resist Series With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the...

10000uF 50Vdc, FW Series, Electrolytic Capacitor +/-20% Tolerance, 25mmD x 50mmH Nichicon FW Electrolytic Caps are built for high end audio. They offer low distortion, mechanical damping and fine-tuned sonic performance, all in a compact form factor...

22000uF 80Vdc, KG Series, Electrolytic Capacitor Super Through, Solder Lug, +/-20% Tolerance, 76mmD x 100mmH These audio-grade capacitors are great for power supplies. They offer striking sound and come in three DIY-friendly models. Features:Great for...

22uF 10Vdc, SW Series, Electrolytic Capacitor +/-20% Tolerance, 4mmD x 7mmH This pint-sized performer is great for when you want to improve your sound and space is tight. At only 7mm high, the SW Aluminum Electrolytic Capacitor will give you audio-grade...

Obbligato 0.68uF 630Vdc Copper Series Film Cap These Obbligato film caps have a solid copper case, soldered copper lead-out wires and individually wrapped. All measure very close to rated value, max 5% but typically 1-2%. Wound tight with no voids and...

Obbligato 0.68uF 630Vdc Premium Gold Capacitor Few metalized polypropylene caps at this price point can compete with the big boys of hi-fi. Obbligato’s Gold Premium Capacitors feature tight windings and non-magnetic gold casings that’ll give you smooth...

130K Ohm 0.25 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

240K Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

360K Ohm 0.25 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

43K Ohm 0.25 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

62R Ohm 0.25 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

7R5 Ohm 0.25 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

16R Ohm 0.5 Watt, Shinkoh Tantalum Film Resistor, 1% Tolerance, Tinned Copper Axial Leads

33R Ohm 0.5 Watt, Shinkoh Tantalum Film Resistor, 1% Tolerance, Tinned Copper Axial Leads