Parts & Components

Superior Z-Cap, 12.00µF 800VDC, 2% Tolerance, MKP The Jantzen Audio Superior Z-cap range of metallized polypropylene caps offer a well priced upgrade for signal and cross-over applications.  Designed for audio, these gems provide a superb overall sonic...

Cross Cap, 2.40µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Standard Z-Cap, 3.60µF 400VDC, 5% Tolerance, MKP What sets the Standard Z-Caps aside from the Cross Caps and other single foil PP caps on the market, is the higher quality German made metallized PP foil and the PCOCC lead-wires.  All Jantzen Audio...

Jantzen EleCap 1.50µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Resistor Ceramic, 100.00Ω 5W, 5% Tolerance, Wire wound

Jantzen Resistor Mox, 1.00Ω 10WThe MOX resistors are high quality foil-based audio grade resistors. They feature a high temperature tolerance and are very resistant to shock. These resistors have always been a staple for professional audio manufacturers...

Resistor Superes, 3.30Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Jupiter Capacitor 0.33uF 400Vdc Copper Foil Paper & Wax The finest copper foil audio capacitors available. Jupiter Copper Foil Paper & Wax Capacitors go far beyond a mere copper foil version of the standard tubular HT Aluminum design. Every...

1K6 Ohm 5 Watt, Kiwame Carbon Film Resistor, 1% Tolerance, Axial, Tinned Copper Leads, Flameproof Silicone Coated

240R Ohm 2 Watt, Kiwame Carbon Film Resistor, 1% Tolerance, Axial, Tinned Copper Leads, Flameproof Silicone Coated

3.3uF 250Vdc, 5% Tolerance, Copper Foil Paper /Polypropylene in Oil, KPCU-03 Series Capacitor The KPCU-03 capacitors are made on the basis of paper and polypropylene dielectric films in a specially designed configuration. The capacitor section is...

Mills Resistor 0R1 (0.10R) Ohm 5W MRA-5 Series, Non-Inductive Wirewound ± 1% Tolerance

180R Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

91R Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

Mundorf (35-50mm) MPSA Assembly Pads Self Adhesive These adhesive pads from Mundorf are useful as padding to add to the bottom of your capacitors to dampen mechanical vibrations. Specifications:Dimensions: 35mm x 80mm

Mundorf Capacitor 15.0uF 250Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

Mundorf Capacitor 68.00uF 100Vdc MLytic® ECap100 (Raw) Polarised electrolytic capacitors which have the most compact design and are therefore used for very high capacities (e.g. for the voltage supply of amplifiers) cannot transfer any audio signals...

Mundorf Resistor 0R47 (0.47) Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e...