Parts & Components

3K9 Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

47R Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

6R2 Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

91R Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

Mundorf Capacitor 0.68uF 450Vdc MCap® EVO Oil The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the...

Mundorf Capacitor 1.00uF 450Vdc MCap® EVO SilverGoldOil The MCap® EVO SilverGold.Oil was developed in 2012 to specifically create the powerful and finely nuanced acoustic colours that are typical to the SilverGold in as compact and cost-effective a...

Mundorf Capacitor 10uF 450Vdc MCap® EVO Aluminum Series The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised...

Mundorf Capacitor 10.00uF 100Vdc MLytic® ECap100 (Raw) Polarised electrolytic capacitors which have the most compact design and are therefore used for very high capacities (e.g. for the voltage supply of amplifiers) cannot transfer any audio signals...

Mundorf Capacitor 560.00uF 63Vdc MLytic® ECap63 (Raw) Aluminium electrolytic capacitors are used in applications for which film capacitors are not suitable for reasons of space and/or cost. Polarized electrolytic capacitors which have the most compact...

Mundorf Resistor 0R10 (0.10) Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e...

Mundorf Resistor 15R Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

10000uF 50Vdc, FW Series, Electrolytic Capacitor +/-20% Tolerance, 25mmD x 50mmH Nichicon FW Electrolytic Caps are built for high end audio. They offer low distortion, mechanical damping and fine-tuned sonic performance, all in a compact form factor...

#4-40 KEP Nuts, Stainless

Obbligato 22uF 250Vdc “New” Copper Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 4.7 L x3.3cm D Coming In the audio world, there aren’t many low-cost high-quality film caps. Some of the ones commonly available are a little edgy...

0R5 (0.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

1R8 (1.8R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

4R3 Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

240K Ohm 0.5 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic