Parts & Components

Mundorf Capacitor 2.20uF 450Vdc MCap® EVO SilverGoldOil The MCap® EVO SilverGold.Oil was developed in 2012 to specifically create the powerful and finely nuanced acoustic colours that are typical to the SilverGold in as compact and cost-effective a...

Mundorf Capacitor 2.2uF 630Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure make...

Mundorf Capacitor 10000uF 40Vdc MLytic® AG MLGO The MLytic® AG · Audio Grade Power Cap series is especially engineered for use in small power and pre amplifiers.  MLGO · glue-on capacitors offer non-magnetic. straight. tinned copper wires Ø 1.2mm ≈...

Mundorf Capacitor 47000uF 80Vdc MLytic® HC The MLytic® HC Series offer ultra-low ESR and ESL due to a patented internal connection technique.  These capacitors, which were originally developed for use in locomotives, are consequently optimized for audio...

Mundorf Capacitor 4700uF 63Vdc MLytic® AG MLGO The MLytic® AG · Audio Grade Power Cap series is especially engineered for use in small power and pre amplifiers.  MLGO · glue-on capacitors offer non-magnetic. straight. tinned copper wires Ø 1.2mm ≈ AWG17...

Mundorf Resistor 1R0 10W MResist Classic Series Ceramic Wirewound ± 2% Tolerance The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic...

Mundorf Resistor 1R2 Ohm 20W MResist Supreme Series Non-Inductive Wirewound ± 2% Tolerance With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two...

Mundorf Resistor 22R Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 3R3 Ohm 25W MResist R25 Series Wirewound ± 2% Tolerance These rectangular resistors offer cement constructions that reduce unwanted vibrations.  The Mundorf MResist 25W Resistor features a rugged cement construction designed to reduce...

Mundorf Resistor 3R9 10W M-Resist Classic Series The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic resistor format that gives...

Mundorf Resistor 6R8 MResist Ultra 30 Watt MREU30 Resistor To celebrate Mundorf's 35 years of research, development, and service in the audio component industry they have created their all-new top of the range foil resistor, the MREU30. Housed in the...

NC3FX, 3 Pin Female XLR Plug, Silver-Plated Contacts This 3-pin industry standard XLR cable connector features a nickel housing with silver contacts. It’s got a durable zinc diecast shell and it’s easy to assemble, with only four parts and no screws...

Obbligato 0.0047uF 630Vdc  “New” Silv Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 6/16"L x 3/16"D Silv Series sounds smoother than the copper series and as smooth as the Ultra Series

0R33 (0.33R) Ohm 12 Watt, Ohmite AG12 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 44.5mm L x 7.9mmD, Axial Lead

15R Ohm 5 Watt, Ohmite AG5 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 23.8mm L x 8.7mmD, Axial Lead

4R7 (4.7R) Ohm 12 Watt, Ohmite AG12 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 44.5mm L x 7.9mmD, Axial Lead

2R2 (2.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

6R2 Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance