Parts & Components

1K5 Ohm 2 Watt, TKD CM2 Series, Metal Film Resistor, 1% Tolerance, Non-Magnetic, Axial Leads

Amtrans Capacitor 0.22uF 630Vdc AMCO Series (Discontinued) These metalized PET film capacitors have a 630VDC rating and are built to reduce current distortion in your setup. They’ll clean the electricity in your tube amps and give you crystal sound...

Amtrans Capacitor 0.47uF 630Vdc AMCO Series (Discontinued) These metalized PET film capacitors have a 630VDC rating and are built to reduce current distortion in your setup. They’ll clean the electricity in your tube amps and give you crystal sound...

Polystyrene Capacitor 470pF 160Vdc Aluminum Foil Polystyrene Capacitor With tolerances as low as just 2%, polystyrene capacitors are great for a wide variety of applications. They’ve got the kinds of electrical characteristics that make...

220K Ohm 0.5 Watt, Tepro RA Series, " Audio Grade" Metal Film Resistor, 1% Tolerance, 25ppm, Axial Leads

0.01uF 160Vdc (100VAC), MKP-1837, Metalized Film Capacitor 1% Tolerance, 5.5mmW x 7mmH x 7.5mm L The Roederstein MKP 1837 is a polypropylene film capacitor that will clean the grainy fuzz from your playback. It’s great for all kinds of jazz, fusion and...

AECO AMI-1060R Rhodium-Plated Tellurium Copper 3-pin Male/Female XLR Plugs It can be assort with other standard XLR. Non-coaxial conduction are able to use single point conduction while plug connect to jack. Conductor between body isolate by PTFE...

ConneX Connector Gold-Plated, Copper “Stepped” Spade LugsSpecifications:Conductor material: Pure CopperPlating process: 5 micronsInstall cable diameter: Max 4.2mmSpade inner size: Top 8.2mm - Bottom 6.2mmSpade outer size: 13.5mm

6A 600V, Schottky, Infineon Technologies IDH06G65C5XKSA1, TO-220, 2-Lead

F&T Capacitor 100uF 500Vdc Series A These axial (2 lead), leaded electrolytic caps from F&T are made in Germany to give audiophiles great tonal quality and high reliability. With a long-life rating of 5000 hours @ 85 °C, they’ll keep your music...

Jantzen EleCap 22µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

22uF 35Vdc, SW Series, Electrolytic Capacitor +/-20% Tolerance, 5mmD x 7mmH This pint-sized performer is great for when you want to improve your sound and space is tight. At only 7mm high, the SW Aluminum Electrolytic Capacitor will give you audio-grade...

0R47 (0.47R) Ohm 5 Watt, Ohmite AG5 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 23.8mm L x 8.7mmD, Axial Lead

33K Ohm 1 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

82K Ohm 1 Watt, PRP, PR9372 Series, Metal Film Resistor, 1% Tolerance, 100ppm, Non-Magnetic

220R Ohm 0.5 Watt, Shinkoh Tantalum Film Resistor, 1% Tolerance, Tinned Copper Axial Leads

330R Ohm 0.25 Watt, Allen Bradley, RC Series, Carbon Composition Resistor

10000uF 80Vdc, KG Series, Electrolytic Capacitor Gold Tune, Solder Lug, +/-20% Tolerance, 50mmD x 80mmH These audio-grade capacitors are great for power supplies. They offer striking sound and come in three DIY-friendly models. Features:Great for power...