Parts & Components

Duelund Capacitor 5.6uF 250Vdc JDM PP Series Metalized Polypropylene+/-5% Tolerance The JDM PP series caters to music enthusiasts in search of premium sound without splurging. Providing an economical substitute to the esteemed Duelund CAST PP range,...

F&T Capacitor 50+50uF 500Vdc Series LFAZ These dual selection radial (3 solder lug) electrolytic caps from F&T are made in Germany and provide two aluminum electrolytics in one. These high-quality caps give audiophiles great tonal quality and...

Cross Cap, 30.00µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Standard Z-Cap, 47.00µF 400VDC, 5% Tolerance, MKP What sets the Standard Z-Caps aside from the Cross Caps and other single foil PP caps on the market, is the higher quality German made metallized PP foil and the PCOCC lead-wires.  All Jantzen Audio...

Cross Cap, 6.80µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Jantzen Electrolytic Cap, 27.00µF 100VDC, 10% Tolerance, Non-polarized (NP) M.D.L. Discontinued Electrolytic Capacitors are in small in size and offers good performance on crossovers, where sizing is an important factor. These capacitors are...

Jantzen Resistor Superes, 15.00Ω 10WComponent selection by manufacturers are often based on cost alone rather than performance, giving the DIYer plenty of scope for improving their sound. These high quality 10 watt wire wound, ceramic core resistors from...

Jantzen Resistor Superes, 6.80Ω 10WComponent selection by manufacturers are often based on cost alone rather than performance, giving the DIYer plenty of scope for improving their sound. These high quality 10 watt wire wound, ceramic core resistors from...

Resistor Superes, 6.80Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Jupiter Cosmos 22uF 500Vdc Electrolytic Capacitor The Cosmos Electrolytic Capacitors is a new axial range of caps, from Jupiter Condenser. This cap range took its design inspiration from early American Wet Electrolytic capacitors, used in both classic...

24K Ohm 2 Watt, Kiwame Carbon Film Resistor, 1% Tolerance, Axial, Tinned Copper Leads, Flameproof Silicone Coated

51R Ohm 2 Watt, Kiwame Carbon Film Resistor, 1% Tolerance, Axial, Tinned Copper Leads, Flameproof Silicone Coated

0R39 (0.39) Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

0R91 (0.91) Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

22K Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

6R8 Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

Mundorf Capacitor 0.22uF 630Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

1000uF 16Vdc, KA Series, Electrolytic Capacitor 105C, +/-20% Tolerance, 10mmD x 16mmH Nichicon KA Aluminum Electrolytic Capacitors are great for all kinds of hi-fi equipment. Built specifically for audio, they offer beast-mode bass and scary good...