Parts & Components

6K8 Ohm 2 Watt, Kiwame Carbon Film Resistor, 1% Tolerance, Axial, Tinned Copper Leads, Flameproof Silicone Coated

0.022uF 600Vdc, 5% Tolerance, Paper/Polypropylene in Oil, KPAL Series Capacitors The KPAL capacitors from Miflex, Poland are new to the audio market. These expertly constructed capacitors feature a paper and polypropylene dielectric in a specially...

0.33uF 250Vdc, 5% Tolerance, Copper Foil Paper /Polypropylene in Oil, KPCU-03 Series Capacitor The KPCU-03 capacitors are made on the basis of paper and polypropylene dielectric films in a specially designed configuration. The capacitor section is...

0R75 (0.75) Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

51R Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

5R Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

Mundorf Capacitor 0.01uF 650Vdc MCap® EVO Oil The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metallised with the...

Mundorf Capacitor 0.15uF 450Vdc MCap® EVO SilverGoldOil The MCap® EVO SilverGold.Oil was developed in 2012 to specifically create the powerful and finely nuanced acoustic colours that are typical to the SilverGold in as compact and cost-effective a...

Mundorf Capacitor 2.2uF 600Vdc MCap® Supreme Very soon after its market launch in 1992 the MCap® SUPREME Classic has been internationally acclaimed as top-class capacitor. Today it is considered by many users as a milestone in the modern audiophile...

Mundorf Capacitor 22.0uF 250Vdc MCap® Classic MKP Series The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding an additional housing, the simple printing method and the classic longitudinal structure...

Mundorf Capacitor 15.00uF 100Vdc MLytic® ECap100 (Raw) Polarised electrolytic capacitors which have the most compact design and are therefore used for very high capacities (e.g. for the voltage supply of amplifiers) cannot transfer any audio signals...

Mundorf Capacitor 330uF 450Vdc MLytic® HV The MLytic® HV · High Voltage Power Cap series is especially engineered for use in tube amplifiers. Two classic double capacity versions are available.  The ultra compact, axial leaded MLALcapacitors feature...

Mundorf Resistor 6R8 Ohm 10W MR10 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

NC3FP1, 3 Pin Female Chassis Mount Jacks, Silver-Plated Contacts These 3-Pin XLR Chassis Mount Jacks feature small traditional-style metal panel mounts with large solder cups for easy hard-wiring. Features• Nickel housing• Solder...

470uF 25Vdc, KA Series, Electrolytic Capacitor 105 C, +/-20% Tolerance, 10mmD x 12.5mmH

Obbligato 0.022uF 630Vdc  “New” Silv Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 5/8"L x 5/16"D Silv Series sounds smoother than the copper series and as smooth as the Ultra Series

Obbligato 0.47uF 630Vdc “New” Copper Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 2.6 L x 1.3cm D Coming In the audio world, there aren’t many low-cost high-quality film caps. Some of the ones commonly available are a little edgy...

Obbligato 22uF 630Vdc “New” Silv Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 4.7 L x 3 cm D Silv Series sounds smoother than the copper series and as smooth as the Ultra Series