Resistors

51R Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

5K1 Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

5K6 Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

5R1 Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

680R Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

68R Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

6R2 Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

820R Ohm 12 Watt, MRA12 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

9R1 Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads

Mundorf Heatsink with Adhesive Pad and screws for MResist Ultra Resistors The Mundorf M-resist MREU30 is rated at 3 watts in free air. Fit to the Mundorf heat sink to achieve 30 watts. Supplied with a heat sink pad a M3 nut and a M3 screw for fixing...

Mundorf Resistor 10R0 10W M-Resist Classic Series The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic resistor format that gives...

Mundorf Resistor 15R Ohm 20W M-Resist Series With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the...

Mundorf Resistor 3R3 MResist Ultra 30 Watt MREU30 Resistor To celebrate Mundorf's 35 years of research, development, and service in the audio component industry they have created their all-new top of the range foil resistor, the MREU30. Housed in the...

Mundorf Resistor 4R7 Ohm 10W MR10 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 5R6 Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 6R8 Ohm 20W M-Resist Series With our MResist SUPREME you can enjoy even finest details and spatial information which normally get lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the...

Mundorf Resistor 8R2 Ohm 10W MR10 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 8R2 MResist Ultra 30 Watt MREU30 Resistor To celebrate Mundorf's 35 years of research, development, and service in the audio component industry they have created their all-new top of the range foil resistor, the MREU30. Housed in the...