Spades

VAMPIRE SPD Gold-Plated Spade Lug 10/12awg These Spade Connectors from Vampire are gold-plated, over nickel-plated, over a brass base metal. DIY Tip: After crimping, slide the color coding over the connector extending onto the jacket of the cable. Use a...

VAMPIRE RG8 Gold-Plated (Copper Base) Spade Lug, 8awg (crimped) Gold plated step spade. Made from pure copper and designed to accept 8 gauge cables by crimping or soldering. Slide the color coding on the cable first, crimp or solder on the connector and...

BSP Mini-Spade (for the Screw Terminals on Vintage Amplifiers and Speakers) fits 10-14awg Overall width: 8mmFeatures• Mini-spade for the screw terminals on vintage amps & speakers• Fits 10-14 gauge wire• Overall width: 8.0 mm

Audio Note AN-SS Loudspeaker Cable Y-Spade, Heavy Silver-Plated, Non-Magnetic, (CON-065B) Our Spade connectors are press formed from non-magnetic metal then heavily plated in high purity Silver to the same standard as our RCA connectors, binding posts...

VAMPIRE SPD Tinned Copper Spade Lug, 10-12awg These Spade Connectors from Vampire are gold-plated, over nickel-plated, over a brass base metal. DIY Tip: After crimping, slide the color coding over the connector extending onto the jacket of the cable...

VAMPIRE HDS1 1/4" Gold Plated (Copper Base) Spade Lug, 6awg Made from pure copper, then gold plated. #HDS-1 will accept cables up to 6 ga., in size. Termination may be either solder or crimp. When crimping, be sure to crimp opposite the seam. The #HDS-1...

G-Fork Spade, Right-Angled, Gold-Plated Brass

ConneX Connector Gold-Plated, Copper “Stepped” Spade LugsSpecifications:Conductor material: Pure CopperPlating process: 5 micronsInstall cable diameter: Max 4.2mmSpade inner size: Top 8.2mm - Bottom 6.2mmSpade outer size: 13.5mm

FP-209(R)S10 Pure Copper Spade Terminal, Rhodium-Plated (Max 10awg Wires)Features• α(Alpha) Pure copper Conductors• Connections: solder or crimp• Specified for wire diameters up to 4mm (8AWG)• Dimensions: 8mm ± 0.1mm (W)...

CLJP C Copper Jumper (fits 6mm) Note: Discontinued Qty Avail: 10 Cardas Audio CLJP Copper Jumpers allow you to run single-ended speaker cables to your bi-wirable speakers. It’s one-piece bare copper construction is both durable and economic, allowing...

O Ring Spade, 12awg, Gold-Plated Copper, 12-10awg, Large

ConneX Connector Carbon Fiber, Rhodium-plated Spade Connector

FP-201(G) High Performance, Spade-Terminal, 24K Gold PlatedFeatures• Pure copper α(Alpha) Conductors• Connections: Set screw or solder• Max Cable Size: up to 6mm• Space between Conductor (Binding Post): 8.2mm• Overall...

FP-201(R)High Performance, Spade-Terminal, Rhodium PlatedFeatures• Pure copper α(Alpha) Conductors• Connections: Set screw or solder• Max Cable Size: up to 6mm• Space between Conductor (Binding Post): 8.2mm• Overall...

PM-33 Spade Connector Kit, Ultra Plated Bare Copper (fits posts 0.28" to 0.345" Oversized Binding Posts) A unique feature of this connector is the compressible wafer between the contacts, which maintains dynamic pressure on the binding post. This...

Fork Spade, 14awg, Gold-Plated Copper, 16-14awg

AECO ASP-1931S Silver-Plated Tellurium Copper Spade Connectors One piece Y Spade were made by stamping process. The Y spade interface with wave design that it with elasticity when the using within binding post. Spade plug was half cross cutting shape...

GRS U Gold Rhodium-Plated over Copper Spade Lug The Cardas Audio GRS is stamped from copper and plated in rhodium to give audiophiles a pure connection with alluring musical warmth. Features• Stamped from copper• Rhodium-plated• Comes...