Vampire Collection

VAMPIRE 557-Y RCA Male Plug (Yellow stripe), 5.6mm opening An entry level RCA. Gold plated over brass. Accepts a 5-6mm overall diameter cable.  Specifications:RCA Male Plug5.6mm openingGold platedBrass material

VAMPIRE XLR-CM XLR Male Jack Vampire’s own XLR. Copper alloy contacts are gold plated, obtaining the finest results from a balanced connector. Specifications:XLR Female JackCopper materialGold Plating

VAMPIRE PC2V Dual Right-Angled Gold-plated RCA Female Jack, pc-mount Entry level PC mount RCA connector. Brass base with gold plating and PBT dielectric.  Specifications:RCA Female JackBrass materialGold Plating

VAMPIRE XLR-CF XLR Female Jack Vampire’s own XLR. Copper alloy contacts are gold plated, obtaining the finest results from a balanced connector. Specifications:XLR Female JackCopper materialGold Plating

VAMPIRE CM-HEX RCA Female Jack (Red only, w/stripe), inside nut Designed to be the finest connector available. The CMHEX is gold plated with a Teflon dielectric. The CMHEX comes with a gold plated ground lug. Isolation washers are also included. It is...

VAMPIRE 807 RCA Male Plug, 7.2mm opening Designed to offer the same mechanical integrity as the acclaimed #800C, but at a lower price. The 807 is machined from brass instead of OFC. The polished chrome barrel insures a proper fit for cables up to 7.2 mm...

VAMPIRE 582 RCA Female Plug Designed to make proper electro-mechanical contact. Place the barrel and strain relief spring on the cable. Strip and tin the center conductor (3/16”). Solder to the center pin. Twist the shield together and solder to the...

VAMPIRE B8 Male Banana Plug, 8awg The #B8 may be crimped or soldered. Slide the color coded cap over the outer jacket of the cable. Strip 1/2” of conductor, insert stripped conductor into connector, then crimp or solder in place. Slide color code cap...

VAMPIRE BD Dual Male Banana Plug, 6 awg The #DB/2 is a cost effective double banana plug. It is a standard 3/4” spacing and will accept up to a 10 gauge cable.  Specifications:Male banana plug6awgCopper materialGold Plating

VAMPIRE PC-BNC Right-Angled BNC Female Jack (75 Ohm), pc-mount The PC-BNC has a Teflon* Dielectric brass base metal, a copper subplate, silver subplate, and a hard gold finish.  Specifications:Female JackBrass materialCopper & Silver subplatesGold...

VAMPIRE PCB2F/S Straight RCA Female Jack, pc-mount A straight version PCB mount connector made with a Teflon* dielectric. The PCB2F/S has a brass base metal, a copper subplate, silver subplate, and a hard gold finish.  Specifications:RCA Female...

VAMPIRE C4X Co-Axial RCA Male Plug (Chrome/no logo), 4.2mm opening For 3.5-4.2mm diameter cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to 1/4”, strip tip 1/2” of center...

VAMPIRE YF RCA Adapter, 1 Male / 2 Female Angle Vampire Wire #YF Adapters  are machined from hard brass, with a plating that was developed from Vampire Wire's finest RCA connectors.  The #YF uses deep contact tubes with Teflon® dielectrics. These Y...

VAMPIRE LRCA-7 RCA Male Plug, Locking 7mm opening The LRCA7 is designed to lock by compressing the ground crown to the chassis connector. The outer body controls the locking feature. Both coaxial and twinaxial cables are easily installed. To plug the...

#504 VAMPIRE BD/2 Dual Male Banana Plug (Black only), 10awg

VAMPIRE C7X Co-Axial RCA Male Plug (Satin/no logo), 7.3mm opening For 6.5-7.3mm diameter cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to 1/4”, strip tip 1/2” of center...

VAMPIRE C9X/Y Co-Axial RCA Male Plug (Satin/Yellow stripe), 9.4mm opening For 8.7-9.4mm diameter cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to 1/4”, strip tip 1/2” of...

VAMPIRE CM2F RCA Female Jack (Red Only), outside nut Designed to be the finest connector available. The CM2F is gold plated and comes with all needed mounting hardware. It is designed to fit on chassis that have a .5” hole where the mount nut is on the...