0.1uF 160Vdc (100VAC), MKP-1837, Metalized Film Capacitor 1% Tolerance, 5.5mmW x 7mmH x 7.5mm L
The Roederstein MKP 1837 is a polypropylene film capacitor that will clean the grainy fuzz from your playback. It’s great for all kinds of jazz, fusion and classical music. You won’t find another low-priced cap with this much instrumental separation.
Features
• Great for timing, LC/RC filter circuits, high frequency coupling/decoupling, sample and hold circuits
• Extended metalized polypropylene film dielectric
• Vacuum deposited aluminum electrodes
• Concert hall sonic signature that helps you get into the recording
• Transparency that removes grain and allows you to experience true instrumental separation
• Flame retardant blue plastic case
• Sealed with an epoxy resin
• Tinned wire leads
• Lead (Pb) free
• RoHS compliant
Technical Specifications
• Voltage Rating: 160 VDC / 100 VAC
• Test Voltage: 1.6 x UR for 2 s
• Tolerances: ± 10% (K), ± 5% (J), ± 2.5% (H), ± 1% (F)
• Operating Temperature Range: -55°C to 100°C
• Capacitance Drift: Up to 40°C, <0.5% for a period of two years
• Insulation Resistance: Measured at 100 VDC after one minute 100,000 MΩ minimum value
• Temperature Coefficient: -250°C x 10-6/°C (typical value)
• Maximum Pulse Rise Time: dv/dt = 390 V/μs (If the maximum pulse voltage is less than the rated voltage, higher dv/dt values are permissible)
• Derating for DC and AC Voltage: At +85°C: UC = 1.0 UR At +100°C: UC= 0.7 UR
• Self Inductance: ~ 6 nH measured with 2mm long leads
• Pull Test of Leads: ≥ 30 N in direction of leads according to IEC 60068-2-21
• Dielectric Absorption: 0.05% (typical value) acc. to IEC 60384-1
• Reliability: Operational Life > 300,000 h Failure Rate < 5 FIT (40°C and 0.5 x UR)