3R (3.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE C4X Co-Axial RCA Male Plug (Chrome/no logo), 4.2mm opening For 3.5-4.2mm diameter cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to 1/4”, strip tip 1/2” of center...

2R7 (2.7R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 2K2 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

2R5 (2.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K8 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

2R2 (2.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K5 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

2R (2.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

1R8 (1.8R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE C5X/CB Co-Axial RCA Male Plug (Copper Base/Black), 5.7mm opening Copper with direct gold plating. For 5-5.7mm dia. cables. Uses compression to insure proper RF shielding and strain relief. Slide nut on cable. Strip 3/4” of jacket, cut shield to...

Audio Note 1K2 Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

1R5 (1.5R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

Audio Note 1K Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

1R2 (1.2R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

VAMPIRE BP-2/CE Gold-Plated Dual Binding Posts, 1/8" mounting shaft When it’s time to upgrade your Binding Posts this is a good choice if you don’t want to enlarge the mounting holes to accept the larger shanks on our upgrade posts. The BP-2/CE is a...

820R Ohm 0.5 Watt, Non-Magnetic, Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned OFC...

1R (1.0R) Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance