Jantzen Collection

Jantzen EleCap 120µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen Electrolytic Cap, 47.00µF 100VDC, 10% Tolerance, Non-polarized (NP) M.D.L. Discontinued Electrolytic Capacitors are in small in size and offers good performance on crossovers, where sizing is an important factor. These capacitors are excellent...

Resistor Ceramic, 10.00Ω 5W, 5% Tolerance, Wire wound Specifications:5% ToleranceSmall dimensionResistance to humidity and shockCompletely insulated character, suitable for circuit boardsIn high resistance values, the winding cores are replaced by...

Jantzen Resistor Ceramic, 1.00Ω 10WSecond in the line of of the 3 power ratings Ceramic resistors from Jantzen. The 10W Ceramic resistors are affordable resistors and a stable in OEM speaker production. They feature a high temperature tolerance and are...

Jantzen Resistor Ceramic, 7.50Ω 10WSecond in the line of of the 3 power ratings Ceramic resistors from Jantzen. The 10W Ceramic resistors are affordable resistors and a stable in OEM speaker production. They feature a high temperature tolerance and are...

Jantzen Resistor Mox, 1.00Ω 10WThe MOX resistors are high quality foil-based audio grade resistors. They feature a high temperature tolerance and are very resistant to shock. These resistors have always been a staple for professional audio manufacturers...

Resistor Superes, 3.30Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Resistor Superes, 5.10Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Jantzen EleCap 470µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Silver Z-Cap, 0.1µF 1200Vdc, 2% Tolerance, MKP The Jantzen Audio Silver Z-cap range of polypropylene caps are a step up from the Superior range with pure silver leadouts that offer a super smooth sound, and neutral tonal balance without coloration. The...

Cross Cap, 0.33µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Silver Z-Cap, 0.47µF 800VDC, 2% Tolerance, MKP The Jantzen Audio Silver Z-cap range of polypropylene caps are a step up from the Superior range with pure silver leadouts that offer a super smooth sound, and neutral tonal balance without coloration. The...

Amber Z-Cap Cap, 1.00µF 200VDC, 3% Tolerance The Amber Z-Cap is a super high-end pure copper foil capacitor, designed specifically for passive crossovers (mainly tweeters). They are also equally well suited for mid-range application, but due to the...

Superior Z-Cap, 1.80µF 800VDC, 2% Tolerance, MKP The Jantzen Audio Superior Z-cap range of metallized polypropylene offer a well priced upgrade for signal and cross-over applications.  Designed for audio, these gems provide a superb overall sonic...

Superior Z-Cap, 15.00µF 800VDC, 2% Tolerance, MKP The Jantzen Audio Superior Z-cap range of metallized polypropylene caps offer a well priced upgrade for signal and cross-over applications.  Designed for audio, these gems provide a superb overall sonic...

Superior Z-Cap, 5.60µF 800VDC, 2% Tolerance, MKP The Jantzen Audio Superior Z-cap range of metallized polypropylene caps offer a well priced upgrade for signal and cross-over applications.  Designed for audio, these gems provide a superb overall sonic...

Cross Cap, 7.50µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Jantzen EleCap 330µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...