Jantzen Collection

Jantzen Electrolytic Cap, 4.70µF 100VDC, 10% Tolerance, Non-polarized (NP) M.D.L. Discontinued Electrolytic Capacitors are in small in size and offers good performance on crossovers, where sizing is an important factor. These capacitors are excellent...

Cross Cap, 2.00µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Resistor Superes, 100.00Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Jantzen Resistor Superes, 10.00Ω 10WComponent selection by manufacturers are often based on cost alone rather than performance, giving the DIYer plenty of scope for improving their sound. These high quality 10 watt wire wound, ceramic core resistors from...

Jantzen EleCap 4.70µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 33µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 15µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 100µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 10uF 5% 100Vdc Non-Polar Electrolytic Capacitor The Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 22µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 27µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 3.30µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Superior Z-Cap, 0.1µF 1200VDC, 2% Tolerance, MKP The Jantzen Audio Superior Z-cap range of metallized polypropylene caps offer a well priced upgrade for signal and cross-over applications.  Designed for audio, these gems provide a superb overall sonic...

Resistor Superes, 0.47Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Resistor Superes, 33.00Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation, small linear temperature coefficientLow annual...

Cross Cap, 1.00µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio application. These MKP caps offer amazing value for money...

Jantzen EleCap 47µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

Jantzen EleCap 3.90µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...