Parts & Components

Mundorf Resistor 0R68 (0.68R) Ohm 10W MResist Classic Series Ceramic Wirewound ± 2% Tolerance The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A...

Mundorf Resistor 12R Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 15R MResist Ultra 30 Watt MREU30 Resistor To celebrate Mundorf's 35 years of research, development, and service in the audio component industry they have created their all-new top of the range foil resistor, the MREU30. Housed in the...

Mundorf Resistor 1R0 10W MResist Classic Series Ceramic Wirewound ± 2% Tolerance The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic...

Mundorf Resistor 1R5 (1.5R) Ohm 10W MResist MOX MR10 Series Metal Oxide ± 2% In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured...

Mundorf Resistor 33R Ohm 10W MR10 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 3R3 10W M-Resist Classic Series The ceramic wire-wound M-Resist Classic MREC10 sits in the Mundorf range above their Metal Oxide (MOX) resistors and below their Supreme 20W resistors. A simple classic resistor format that gives...

Mundorf Resistor 3R3 Ohm 5W MR5 Series In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in...

Mundorf Resistor 4R7 (4.7R) Ohm 30W MResist Ultra MREU30 Series Metal Foil ± 1% Tolerance To celebrate Mundorf's 35 years of research, development, and service in the audio component industry they have created their all-new top of the range foil...

10000uF 6.3Vdc, FW Series, Electrolytic Capacitor +/-20% Tolerance, 16mmD x 25mmH Nichicon FW Electrolytic Caps are built for high end audio. They offer low distortion, mechanical damping and fine-tuned sonic performance, all in a compact form factor...

Obbligato 0.15uF 630Vdc “New” Copper Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 2.2 L x 1.2cm D Coming In the audio world, there aren’t many low-cost high-quality film caps. Some of the ones commonly available are a little edgy...

Obbligato 15uF 250Vdc “New” Silv Series Metalized Polypropylene Film Capacitor Axial Lead Dims: 4.7 L x 2.6 cm D Silv Series sounds smoother than the copper series and as smooth as the Ultra Series

0R68 (0.68R) Ohm 5 Watt, Ohmite AG5 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 23.8mm L x 8.7mmD, Axial Lead

1K5 Ohm 5 Watt, Ohmite AG5 Wirewound Ceramic Core Resistor, AudioGold, Non-Inductive, 1% Tolerance, 23.8mm L x 8.7mmD, Axial Lead

1R1 Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

1R3 Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

1R6 Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance

47R Ohm 10 Watt, Path Audio, Non-Inductive, Non Magnetic Design, Thick Film Resistor, Grounded Copper Case(for RF and EMI shielding), 1% Tolerance