Parts & Components

4K7 Ohm 2 Watt, TKD CM2 Series, Metal Film Resistor, 1% Tolerance, Non-Magnetic, Axial Leads

Vampire BP-0.5 Ground Post The Vampire BP.5 Grounding Post is built from one piece of hard brass (yes, this includes the nut!). First it’s plated in copper, then it’s plated in silver, and then it’s plated in gold to give DIYers the best possible medley...

Vampire Connector PCB2F/A Series Right-Angled RCA Female Jack pc-mount – Black/Red An angled PCB mount connector made with a Teflon* dielectric. The #PCB2F/A has a brass base metal, a copper subplate, silver subplate, and a hard gold finish...

AECO ARJ-4045R Rhodium-Plated Tellurium Copper RCA Female Jack Pair The plug and jack can be assorted and replaced with other standard coaxial RCA. By reducing the size of the conductor and path AECO is able to reduce the resistance, capacitance and...

250K Alps Blue Velvet, STEREO Conductive Plastic Potentiometer, Continuous Rotation

Amtrans Resistor 200R Ohm 0.5W AMRT Series Amtrans, Japan has developed the AMRT series of carbon film resistors to cater to the audio market specifically. Many manufacturers use them in their equipment. So time enough for HFC to offer them to the DIY...

Amtrans Resistor 22K Ohm 0.5W AMRT Series Amtrans, Japan has developed the AMRT series of carbon film resistors to cater to the audio market specifically. Many manufacturers use them in their equipment. So time enough for HFC to offer them to the DIY...

Amtrans Resistor 4K7 Ohm 5W AMRA Series These Japanese-made parts are robustly made, conservatively designed with a 5% tolerance, featuring non-magnetic construction, and RoHS compliant with solder-coated OFHC copper leads. They offer audio constructors...

Audio Note 1K Ohm 1 Watt, "Non-Magnetic" Tantalum Film Resistor, Axial Lead The all new  Tantalum resistors from Audio Note are similar to the old Shinkoh resistors in that they are non-magnetic, using a high copper content brass end cap with a tinned...

Audyn MKP Plus Capacitor, 1.00mF 800Vdc, 2% Tolerance, Axial Lead, 43x25mm These ultra-low loss capacitors have been developed for extreme impulse/power handling. An important design/constructional feature is the power handling of the connection between...

V6 VIVID Dual Discrete Opamp, EachThe V6 Vivid is dynamic, transparent and exciting.Measuring 12.4mm X 14.5mm X 29mm (0.48 in x 0.57 in x 1.14 in)

CM F XLR Chassis/PCB Mount, XLR Jack Female The CM F XLR is a premium-build chassis mount XLR jack with a eutectic billet brass body and a gold-plated housing. Its pins are plated in rhodium-over-silver to provide the purest signal connection an...

ClarityCap Capacitor 1.2uF 250Vdc ESA Series ClarityCap has put science to work in their ESA and CSA series of film caps. Two years of research at the University of Salford’s world-renowned Acoustics Research Centre has resulted in a tightly-packed...

4 Position Silver-Plated Terminal Strips "Slotted" Steatite Ceramic Terminal Strip

Elna 2200uF 16Vdc, ROA Series, Electrolytic Capacitor 18mmD x 35.5mmL

Jantzen EleCap 68µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/- 5% on capacitance, it is a more precise capacitor than...

0.001uf (1000pf) 600 Vdc, ATTE Series, Polystyrene (Styroflex) Film & Foil Capacitor, 2% or 5% Tolerance

18K Ohm 5 Watt, MRA5 Non-Inductive Wirewound Resistor, 1% Tolerance, 20ppm, Axial Leads