Jantzen Collection

Jantzen EleCap 3.30µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 4.70µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Cross Cap, 2.00µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio...

Cross Cap, 0.1µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio...

Jantzen EleCap 33µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 10uF 5% 100Vdc Non-Polar Electrolytic Capacitor The Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 15µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 100µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 47µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 22µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen EleCap 8.20µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen Electrolytic Cap, 4.70µF 100VDC, 10% Tolerance, Non-polarized (NP) M.D.L. Discontinued Electrolytic Capacitors are in small in size and offers good performance on crossovers, where sizing...

Cross Cap, 1.00µF 400VDC, 5% Tolerance, MKP Jantzen Cross Cap capacitors are built from ultra-high-quality European metallized film and provide superb sonic accuracy and detail for any audio...

Jantzen EleCap 27µF 5% 100Vdc Non-Polar Electrolytic CapacitorThe Jantzen eleCap 5%, is a standard-type aluminum electrolytic capacitor, using etched or “raw” foil. With a low tolerance of only +/-...

Jantzen Resistor Superes, 10.00Ω 10WComponent selection by manufacturers are often based on cost alone rather than performance, giving the DIYer plenty of scope for improving their sound. These high...

Resistor Superes, 100.00Ω 5W, 1% Tolerance, Wire wound, Flame proof wrappingSpecifications:1 % ToleranceLow noise figureLow inductance less than 0.7 uHInstant overload capacitySuper heat dissipation,...

Superior Z-Cap, 0.1µF 1200VDC, 2% Tolerance, MKP The Jantzen Audio Superior Z-cap range of metallized polypropylene caps offer a well priced upgrade for signal and cross-over applications.  Designed...

Standard Z-Cap, 2.2uF 400VDC, 5% Tolerance, MKP What sets the Standard Z-Caps aside from the Cross Caps and other single foil PP caps on the market, is the higher quality German made metallized PP...